|
1100 Series (Liquid gasket)
Liquid gaskets have been developed based on entirely different concept and leak-preventing theory from solid-sheet gaskets. By coating a mechanical joint with one of these liquid gaskets before assembly, the leaks can be prevented. These materials can have very important effects in improving the performance of equipment, prolonging its functional life, and reducing the total cost. More than 20 types are available to meet the needs of working conditions such as joint temperature, vibration, pressure, contact in fluid, and clearance.
Type
(product
number) |
Major
component |
Property |
Physical property |
Protub-
erance |
Remova-
bility |
Visco-
sity |
Applicable
temperature
range(°C) |
Diluting
solvent |
Quantity |
Color
and
appearance |
Viscosity
(25°C) |
Specific-
gravity
(25°C) |
Non-
volatile
matter
% |
State
after
drying |
Rubber
elasticity |
Solvent type
1102 |
Denatured
alkyd resin |
Yellow viscous liquid |
6.9(69) |
1.33 |
79 |
Nondrying |
|
Ordinary |
Difficult |
Yes |
-40 to 150 |
2801
solvent |
200g, 1kg |
Solvent type
1103 |
Cellulose
ester resin |
Black viscous liquid |
3.3(33) |
0.87 |
24 |
Dry peeling membrane |
|
Ordinary |
Good |
|
-40 to 110 |
2802
solvent |
150g,1kg |
Solvent type
1105
1105B |
Synthetic
rubber |
Black and silver (B)
viscous liquid |
3.5(35) |
0.92 |
26 |
Dry peeling membrane |
Yes |
Ordinary |
Good |
|
-40 to 150 |
2802
solvent |
150g,1kg |
Nonsolvent type
1101 |
Fatty-acid denatured phenol resin |
Walnut paste |
1000
(10000) |
1.42 |
99 |
Nondrying |
|
Good |
Fair |
little |
-40 to 80 |
|
200g,1kg |
Nonsolvent type
1121 |
Denatured
ester resin |
Gray
paste |
300(3000) |
1.45 |
100 |
Nondrying |
|
Ordinary |
Fair |
Yes |
-40 to 130 |
|
200g,1kg |
Anaerobic type
1110B |
Acrylic resin |
Creamy paste |
50(500) |
1.11 |
85or over |
Cured |
|
None |
Ordinary |
|
-50 to 150 |
|
100g |
Anaerobic type
1130 |
Acrylic resin |
White
paste |
50(500) |
1.15 |
100 |
Cured |
|
None |
Ordinary |
|
-40 to 130 |
|
250g |
| 1194 |
See the product information. |
|
| Viscosity is measured with a B-type rotating viscometer. |
1200 Series (Silicone-based liquid gasket and potting agents)
This silicone-based liquid gasket fills gaps on a flange surface and thus completely prevent leaks. When cured, it forms an excellent rubber-like elastic body offering excellent resistance to vibration and shock. Also it has an excellent resistance to heat, and effectively seals joints that are subjected to high temperature. Select the product that best meets the needs for a particular location or set of working conditions.
| Type |
Major
component |
Property |
Reaction type |
Physical properties after curing |
Slump
fluidity |
Remo
-
vability |
Usable
temperature
range
(°C) |
Quantity |
Color
and
appea
-
rance |
Viscosity
(25°C)
Pa s(P) |
Specific
gravity
(25°C) |
Sur
-
face
drying
time
(min) |
Hard
-
ness
(JISA) |
Tensile
strength
MPa
(kgf
/cm2) |
Elon
-
gation
(%) |
Tensile
-
shearing adhesive strength
MPa
(kgf/cm2) |
Nonsolvent type silicone-based
1206C |
metamorphic silicone |
Black
paste |
90
(900) |
1.45 |
30 |
De-alcohol |
45 |
2.0
(20) |
400 |
2.3(23) |
Non
-
fluidic |
Good |
-40 to 120 |
330ml
200g
20kg |
Nonsolvent type silicone-based
1206D |
metamorphic silicone |
Gray
paste |
80
(800) |
1.46 |
5 |
De-alcohol |
41 |
2.2
(22) |
470 |
2.3(23) |
Non
-
fluidic |
Good |
40 to 120 |
330ml
200g
20kg |
Nonsolvent type silicone-based
1206E |
metamorphic silicone |
Gray
paste |
72
(720) |
1.43 |
16 |
De-alcohol |
33 |
1.8
(18) |
350 |
1.7(17) |
Non
-
fluidic |
Good |
-40 to 120 |
200g |
Nonsolvent type silicone-based
1207B |
Silicone |
Black
paste |
100
(1000) |
1.01 |
7 |
Deacetone |
30 |
1.5
(15) |
425 |
0.9(9) |
Non
-
fluidic |
Slightly difficult |
-60 to 200(250) |
100g
333ml
17kg |
Nonsolvent type silicone-based
1207C |
Silicone |
Walnut
paste |
70
(700) |
1.50 |
5 |
Deacetone |
60 |
4.0
(40) |
170 |
2.0(20) |
Non
-
fluidic |
Good |
-60 to 200(250) |
150g
333ml
20kg |
Nonsolvent type silicone-based
1207D |
Silicone |
Aluminum
color
paste |
70
(700) |
1.50 |
5 |
Deacetone |
60 |
4.0
(40) |
170 |
2.0(20) |
Non
-
fluidic |
Good |
-60 to 200(250) |
150g
333ml
20kg |
Nonsolvent type silicone-based
1207F |
Silicone |
Aluminum
color
putty |
170
(1700) |
1.50 |
5 |
Deacetone |
56 |
3.7
(37) |
190 |
2.2(22) |
Non
-
fluidic |
Good |
-60 to 200(250) |
150g
333ml
20kg |
Nonsolvent type silicone-based
1209 |
Silicone |
Black
putty |
140
(1400) |
1.05 |
10 |
Deacetone |
37 |
2.4
(24) |
300 |
1.4(14) |
Non
-
fluidic |
Good |
-60 to 250(300) |
100g |
Nonsolvent type silicone-based
1211 |
Silicone |
White
paste |
70*
(700) |
1.01 |
90 |
Deoxime |
20 |
1.0
(10) |
230 |
1.0(10) |
Fluidic |
Good |
-60 to 200(250) |
100g
17kg |
Nonsolvent type silicone-based
1212 |
Silicone |
White
paste |
100
(1000) |
1.05 |
20 |
Deoxime |
30 |
2.0
(20) |
300 |
1.0(10) |
Non
-
fluidic |
Good |
-60 to 200(250) |
100g |
Nonsolvent type silicone-based
1215 |
Silicone |
Gray
paste |
20
(200) |
1.55 |
60 |
Deoxime |
45 |
1.5
(15) |
320 |
0.8(8) |
Fluidic |
Good |
-60 to 200(250) |
250g
333ml
20kg |
Nonsolvent type silicone-based
1216 |
Silicone |
Gray
putty |
120
(1200) |
1.40 |
20 |
Deoxime |
60 |
3.0
(30) |
200 |
2.0(20) |
Non
-
fluidic |
Good |
-60 to 200(250) |
120g
330ml
20kg |
Nonsolvent type silicone-based
1216B |
Silicone |
Black
paste |
120
(1200) |
1.50 |
20 |
Deoxime |
50 |
2.0
(20) |
500 |
1.7(17) |
Non
-
fluidic |
Good |
-60 to 200(250) |
100g
330ml
20kg |
Nonsolvent type silicone-based
1216E |
Silicone |
Gray
paste |
200
(2000) |
1.36 |
6 |
Deoxime |
57 |
3.2
(32) |
300 |
2.3(23) |
Non
-
fluidic |
Good |
-60 to 200(250) |
330ml
20g
250kg |
Nonsolvent type silicone-based
1217 |
Silicone |
Gray
putty |
140
(1400) |
1.47 |
20 |
Deoxime |
57 |
2.1
(21) |
400 |
2.3(23) |
Non
-
fluidic |
Good |
-60 to 200(250) |
330ml
20kg |
1217G
|
See the product information. |
Nonsolvent type silicone-based
1217H |
Silicone |
Gray |
300
(3000) |
1.36 |
5 |
Deoxime |
51 |
2.55
(25.5) |
470 |
- |
- |
- |
-60 to 200(250) |
330ml
20kg |
Nonsolvent type silicone-based
1280B |
Silicone |
Gray
putty |
200
(2000) |
1.07 |
3 |
Deoxime |
35 |
2.8
(28) |
480 |
2.0(20) |
Non
-
fluidic |
Slightly
difficult |
-60 to 200(250) |
350g
17kg |
Nonsolvent type silicone-based
1281B |
Silicone |
Walnut
paste |
115
(1150) |
1.45 |
10 |
Deoxime |
60 |
4.8
(48) |
220 |
2.0(20) |
Non
-
fluidic |
Good |
-60 to 200(250) |
460g
20kg |
|
 |
| Viscosity is measured with JIS K2220 test method. - * The viscosity of 1211 is measured with a B-type rotating viscometer. - Shearing adhesive strength was measured with AL/AL method. - The usable temperature range is the range of normal use; the temperature given in ( ) is the the highest that can be applied for a short time. |
|
1220 Series (Silicone-adhesive sealants for electronic equipment)
The products in the ThreeBond 1220 series are one-component silicone adhesive sealants for the bonding, fix-sealing, coating, and potting of electrical and electronic parts. Conventional de-alcohol silicone RTV rubbers have slow surface-curing and deep-curing properties, as well as unsatisfactory storage stability. The products in the 1220 series show remarkable improvements in all these properties. They dry and cure quickly at room temperature, they are resistant to corrosion, and they have excellent storage stability.
 |
1220G |
|
Silicone adhesive sealant for electric and electronic equipment |
|
1220H |
|
Silicone adhesive sealant for electric and electronic equipment |
|
1221G,1221H |
|
Silicone adhesive sealant for electric and electronic equipment |
|
1224G |
|
Silicone adhesive sealant for electric and electronic equipment |
|
1225B |
|
Heat-dissipating, silicone adhesive and sealant (electric-contact-failure proof) |
1300 Series (Anaerobic high-strength sealant)
The products in the ThreeBond 1300 Series are anaerobic, extra-strength sealants developed by application of our proprietary technologies. Unlike ordinary sealants and adhesives, these do not cure when exposed to air. Rather, when they penetrate into narrow gaps in metal structures they cure in the absence of air, at room temperature, without contracting. They offer excellent resistance to vibration, heat, and chemical action. They bond the joints or threads of mechanical parts and devices chemically, preventing them from loosening and leaking. Each of them is one-part and nonsolvent, and therefore has good workability and is easy to use.
| Product name |
Color and appearance |
Viscosity |
Breakdown torque |
Curing speed |
Lubrication |
Applicable temperature range |
|
|
mPa s(cP) |
Nm(kgfcm) |
until practical
strength |
until Maximum
strength |
|
°C |
For
general
screws |
|
Green |
150(150) |
45(460) |
1 hr |
12 hr |
|
-40-150 |
|
|
Red |
600(600) |
26(270) |
1 hr |
12 hr |
Y |
-40-150 |
|
|
Blue |
600(600) |
16(160) |
1 hr |
12 hr |
Y |
-40-150 |
1360E |
|
|
Blue |
200(200) |
43 |
2 hr |
12 hr |
|
-40-200 |
|
|
Green |
500(500) |
42 |
1 hr |
12 hr |
|
-40-200 |
| 1386D |
Russet |
1800(1800) |
(160) |
5 hr |
36 hr |
Y |
-40-150 |
| Product name |
Color and appearance |
Viscosity |
Joint strength
(Fe) |
Joint strength
(stainless steel) |
Joint strength
(aluminum) |
Set time |
UV-curing property |
|
|
mPa s(cP) |
MPa(kgf cm) |
MPa(kgf cm) |
MPa(kgf cm) |
min |
|
For
joints |
|
Blue |
14000(14000) |
32(326) |
20(203) |
18(188) |
2 |
Y |
|
|
Green |
110(110) |
33(336) |
31(311) |
27(275) |
3 |
Y |
|
|
Green |
90(90) |
38(390) |
31(316) |
36(370) |
2 |
Y |
|
| Product name |
Color and appearance |
Specific gravity |
Volatile solvent component |
Product form |
Drying time*1 |
Set time |
| Primer |
1390E |
Dark brown |
0.8 |
Alcohol |
Glass bottle |
About 60 sec |
About 20 sec |
| 1390F |
Dark brown |
0.8 |
Acetone |
Glass bottle |
About 10 sec |
About 10 sec |
|
| *1 Time that surface of the primer requires to dry after being applied to a vertical surface of PPS board, at 25°C |
1400series (Agents to prevent screws from loosening, leaking, and rusting)
The products in the ThreeBond 1400 series are synthetic-resin locking agents that prevent screws and bolts from loosening, leaking, or rusting. The force required to remove a screw to which 1400 has been applied is 10% to 20% greater than the force to tighten it. These products are standard materials, indispensable in the assembly of electronic and mechanical.
Product name
(characte-
ristics) |
Property |
Major
component |
Curing time
B/N*
Tightening
torque=0 |
Torque
under
heat
B/N*
Tightening
torque=0 |
Screw
diameter
and
return
torque
M6 ZnCr B/N*Tightening torque=0 |
Water
resi-
stance
(24 hr at
45 to
50°C) |
Oil
resi-
stance
(24 hr at
45 to
50°C) |
Color
and
appea-
rance |
Viscosity |
Specific
gravity |
Nonvo-
latile
matter |
1 |
2 |
3 |
7 |
25°C |
50°C |
70°C |
M3 |
M4 |
M6 |
M8 |
M10 |
| (Units) |
|
mPa s(cP) |
|
% |
|
N m(kgf cm) |
1401
Does not affect
plastic |
Water-
clear |
350
(350) |
0.88 |
31 |
Polyvinyl
acetate
resin |
0.5
(5) |
1.3
(13) |
1.6
(16) |
1.8
(18) |
1.8
(18) |
1.1
(11) |
0.7
(7) |
0.2
(2) |
0.4
(4) |
1.8
(18) |
4.5
(45) |
9.5
(95) |
1.3
(13) |
1.6
(16) |
1401B
Green version
of 1401 |
Green |
350
(350) |
0.88 |
31 |
Polyvinyl
acetate
resin |
0.5
(5) |
1.3
(13) |
1.6
(16) |
1.8
(18) |
1.8
(18) |
1.1
(11) |
0.7
(7) |
0.2
(2) |
0.4
(4) |
1.8
(18) |
4.5
(45) |
9.5
(95) |
1.3
(13) |
1.6
(16) |
1401C
Red version of
1401 |
Red |
350
(350) |
0.88 |
31 |
Polyvinyl
acetate
resin |
0.5
(5) |
1.3
(13) |
1.6
(16) |
1.8
(18) |
1.8
(18) |
1.1
(11) |
0.7
(7) |
0.2
(2) |
0.4
(4) |
1.8
(18) |
4.5
(45) |
9.5
(95) |
1.3
(13) |
1.6
(16) |
1401D
Lower-
viscosity
version of
1401B |
Green |
19
(19) |
0.84 |
16 |
Polyvinyl
acetate
resin |
0.5
(5) |
1.2
(12) |
1.4
(14) |
1.5
(15) |
1.5
(15) |
1.0
(10) |
0.6
(6) |
0.2
(2) |
0.4
(4) |
|
|
|
|
|
1401E
Higher-
viscosity
version of
1401B |
Green |
550
(550) |
0.90 |
33 |
Polyvinyl
acetate
resin |
0.5
(5) |
1.3
(13) |
1.6
(16) |
1.8
(18) |
1.8
(18) |
1.1
(11) |
0.7
(7) |
0.2
(2) |
0.4
(4) |
1.8
(18) |
4.5
(45) |
9.5
(95) |
1.3
(13) |
1.6
(16) |
1401M
Lower-
viscosity
version of
1401C |
Clear red |
230
(230) |
0.87 |
27 |
Polyvinyl
acetate
resin |
0.5
(5) |
1.3
(13) |
1.6
(16) |
1.8
(18) |
1.8
(18) |
1.1
(11) |
0.7
(7) |
0.2
(2) |
0.4
(4) |
1.8
(18) |
4.5
(45) |
9.5
(95) |
1.3
(13) |
1.6
(16) |
1402
Fast curing
High locking
property |
Tanned |
400
(400) |
1.20 |
28 |
Acrylic-
based resin |
0.7
(7) |
1.1
(11) |
1.3
(13) |
1.5
(15) |
1.5
(15) |
1.2
(12) |
0.6
(6) |
0.2
(2) |
0.6
(6) |
1.5
(15) |
3.0
(30) |
6.0
(60) |
1.3
(13) |
1.6
(16) |
1402B
Green version
of 1402 |
Green |
400
(400) |
1.20 |
28 |
Acrylic-
based resin |
0.7
(7) |
1.1
(11) |
1.3
(13) |
1.5
(15) |
1.5
(15) |
1.2
(12) |
0.6
(6) |
0.2
(2) |
0.6
(6) |
1.5
(15) |
3.0
(30) |
6.0
(60) |
1.3
(13) |
1.6
(16) |
1402D
Yellow version
of 1402 |
Yellow |
400
(400) |
1.20 |
28 |
Acrylic-
based resin |
0.7
(7) |
1.1
(11) |
1.3
(13) |
1.5
(15) |
1.5
(15) |
1.2
(12) |
0.6
(6) |
0.2
(2) |
0.6
(6) |
1.5
(15) |
3.0
(30) |
6.0
(60) |
1.3
(13) |
1.6
(16) |
|
The reaction during the curing is solvent sublimation for all above products.
* ZnCr: zinc chromate-plated, B/N: Bolt/Nut
1500 Series (Industrial use adhesives (synthetic-rubber-based adhesives; moisture-curing, elastic adhesives))
The products in this series are industrial-use adhesives whose major components are solvent-based synthetic rubber and nonsolvent-based, moisture-curing special polymer. The products have strong initial adhesion and do not lose elasticity after bonding.
|
1521 |
|
Synthetic rubber-based adhesive |
|
1530 |
|
One-part, moisture-curing elastic adhesive |
|
1530B |
|
One-part, high-thixotropic, moisture-curing elastic adhesive, black |
|
1530C |
|
One-part, moisture-curing elastic adhesive, clear |
|
1532 |
|
One-part, moisture-curing elastic adhesive, a one-component metamorphic silicone |
1700 Series (Instant adhesives)
The products in the ThreeBond 1700 series are instant adhesives. They are provided in a variety of grades to meet your differing purposes and applications. Please select the products you desire from the list below. Feel free to consult our sales representatives, who will be happy to help you decide which grade best meets each of your needs.
| |
Color |
Viscosity
(mPa s) |
Set time
(Sec) |
Adhesion to materials |
Performance |
Quan-
tity
(g) |
N
B
R |
Steel
Plate |
Steel
Plate |
Al |
Stain-
less
Steel |
Cu |
Brass |
Poly-
car-
bonate |
6l
ny-
lon |
P
P
S |
Acry-
lic
resin
|
N
B
R |
E
P
D
M |
Wood
Mate-
rial |
Pee-
ling
stren-
gth |
Im-
pact
resis-
tance |
Heat
resis-
tance |
Mois-
ture
regis
tance |
Thermo
cycle
resis-
tance |
| 1741 |
Clear |
2 |
5 |
5 |
|
Y |
|
|
|
Y |
|
|
Y |
Y |
Y |
|
|
|
|
|
|
2
20
50 |
| 1743 |
Clear |
100 |
10 |
10 |
Y |
Y |
|
|
|
Y |
|
|
Y |
Y |
Y |
|
|
|
|
|
|
20 |
| 1745 |
Clear |
500 |
10 |
10 |
Y* |
Y |
Y |
|
|
Y |
|
|
Y |
Y |
Y |
|
|
|
|
|
|
20
500 |
| 1747 |
Clear |
2000 |
10 |
10 |
Y* |
Y |
Y |
|
|
Y |
|
|
Y |
Y |
Y |
|
|
|
|
|
|
20 |
|
| Note: Y* means "extremely good." |
| High efficiency, functionality grade |
|
|
| |
Color |
Viscosity
(mPa s) |
Set time
(Sec) |
Adhesion to materials |
Performance |
Quan
-
tity
(g) |
N
B
R |
Steel
Plate |
Steel
Plate |
Al |
Stain
-
less
Steel |
Cu |
Brass |
Poly
-
car
-
bonate |
6l
ny
-
lon |
P
P
S |
Acry
-
lic
resin
|
N
B
R |
E
P
D
M |
Wood
Mate
-
rial |
Pee
-
ling
stren-
gth |
Im
-
pact
resis
-
tance |
Heat
resis
-
tance |
Mois
-
ture
regis
tance |
Thermo
cycle
resis
-
tance |
| Colored type |
| 1702B |
Blue |
35 |
5 |
40 |
Y |
|
|
|
|
|
|
|
Y |
Y |
Y |
|
|
|
|
|
|
50 |
| 1741D |
Blue |
2 |
5 |
5 |
|
Y |
|
|
|
Y |
|
|
Y |
Y |
Y |
|
|
|
|
|
|
20 |
| 1743D |
Blue |
100 |
10 |
10 |
Y |
Y |
|
|
|
Y |
|
|
Y |
Y |
Y |
|
|
|
|
|
|
20 |
| High peeling strength, impact resistance type |
| 1731 |
Lemon
-
yellow |
20 |
60 |
30 |
Y* |
|
Y |
|
|
Y |
|
|
Y |
Y |
Y |
|
Y |
Y* |
|
|
Y |
20
50 |
| 1733 |
Lemon
-
yellow |
150 |
70 |
40 |
Y |
|
|
Y |
|
Y |
|
|
|
Y |
Y |
|
Y |
Y* |
|
|
Y |
20
50 |
| 1735 |
Lemon-
yellow |
1500 |
120 |
60 |
Y |
|
|
Y |
|
|
|
|
|
Y |
Y |
|
Y |
Y* |
Y |
Y |
Y |
50 |
| Gel type |
| 1739 |
Clear |
23000 |
30 |
30 |
Y* |
|
|
|
|
|
Y |
|
Y |
|
|
|
|
|
|
|
|
20 |
| Container with brush type |
| 1743F |
Clear |
100 |
10 |
10 |
|
|
|
|
|
|
Y |
|
Y |
Y |
Y |
|
|
|
|
|
|
4 |
| Type with light-curing function |
| 1771E |
Clear
-
yellow |
2 |
2 |
3 |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
Y |
Y |
Y |
|
|
|
Y |
|
|
20
50 |
| 1773E |
Clear
-
yellow |
150 |
2 |
5 |
Y |
Y |
Y |
Y |
Y |
Y |
Y |
|
Y |
Y |
Y |
|
|
|
Y |
|
|
20
500 |
| Impact-resistant, heat-resistant type |
| 1781 |
Clear |
3 |
5 |
10 |
Y |
Y |
Y |
|
Y |
Y |
|
|
Y |
Y |
Y |
|
|
Y |
Y |
|
|
20
50
500 |
| 1782 |
Clear |
80 |
5 |
10 |
Y* |
Y |
Y |
|
Y |
Y |
Y |
|
Y |
Y |
Y |
|
|
Y |
Y |
|
|
20
50
500 |
| 1783 |
Clear |
800 |
5 |
10 |
Y* |
Y |
Y |
|
|
Y |
Y |
|
Y |
Y |
Y |
|
|
Y |
Y |
|
|
50
500
|
| Fast-curing woodwork type |
| 1785B |
Clear |
3 |
3 |
5 |
|
|
|
|
|
Y |
|
|
Y |
Y |
Y |
Y |
|
|
|
|
|
20 |
| 1786 |
Clear |
150 |
3 |
5 |
Y |
|
|
|
|
|
Y |
|
Y |
Y |
Y |
Y |
|
|
|
|
|
20
50
100 |
| 1787 |
Clear |
1100 |
3 |
5 |
Y |
|
|
|
|
Y |
Y |
|
Y |
Y |
Y |
Y |
|
|
|
|
|
50 |
|
| Note: Y* means "extremely good." |
The products in the ThreeBond 1796 series are curing accelerators that make all of the instant adhesives in the ThreeBond 1700 series cure quickly. ThreeBond 1797 is an adhesive primer especially for use with instant adhesives that easily bond hard-to-bond materials such as polyethylene and polypropylene.
| Product name |
Major component |
Color and appearance |
Viscosity (mPa s) |
Specific gravity |
Characteristics |
Quantity |
Curing
accelerator |
1796 |
Amine compound |
Lemon yellow-clear |
0.9 |
0.82 |
Multipurpose type |
45g |
| 1796B |
Amine compound |
Lemon yellow-clear |
0.9 |
0.82 |
Low-odor type |
45g, 18L |
| 1796E |
Amine compound |
Lemon yellow
to clear brown |
0.9 |
0.86 |
Super-fast-curing type |
500ml |
| 1796F |
Amine compound |
Lemon yellow-clear |
0.9 |
0.81 |
Aerosol type |
180ml |
| 1796G |
Amine compound |
Lemon yellow-clear |
0.9 |
0.82 |
Nonrelevant product to the
Organic Solvent Intoxication
Prevention Regulations of
Japan (alcohol-type) |
500ml |
Primer
|
1797 |
Amine compound |
Lemon yellow-clear |
0.85 |
0.80 |
|
100ml |
|
2000 Series (Two-part, epoxy-compound resins)
Each of the products in this series consists of a main agent and a curing agent. When these agents are mixed and stirred, a chemical reaction and curing occur. The workability and other properties of a product after curing depend on the combination of agents. The series offers a wide variety of grades, from which you can select those whose properties, such as curing speed, properties after curing, and appearance, are best suited to your needs.
| Type |
Properties |
Package |
Appearance of main
agent |
Appearance of curing
agent |
Working time |
Curing time |
Composition ratio |
| 2083 |
White putty |
Turquoise blue putty |
For 100g of
mixture at
25°C, 5 to 6
hour |
For 100g of
mixture at
25°C, 5 to 6
hour |
Capacity ratio, 1(mainagent):
1(curing agent) |
500g of this product with
500g of curing agent,
each in a can
2kg of this
product with
2kg of curing agent, each in a can |
|
|
See the product information. |
|
|
See the product information. |
|
|
See the product information. |
 |
| These products cannot be used to bond polyethylene, polypropylene, nylon, silicone resin, fluorocarbon resin, or soft vinyl chloride. |
2200 Series (One-part, epoxy-compound resins)
The products in this series are enhanced, one-part, epoxy-compound resins developed for electric and electronic equipment. As such equipment has become smaller, lighter, and more powerful, an epoxy resin is required to have better electrical, chemical, and thermophysical properties. It must also have good workability, to support the introduction of automation and fast processing. The 2200 series has been developed to meet these requirements. It is offered in several types, one of which is a high-peel-adhesive-strength type. It is packaged in round cans containing 1, 2, 3, 4, or 5 kg, and in a pail can containing 20 kg. The quantity provided depends on the type.
|
2200 Series |
|
For general bonding, sealing, and casting. Cures at 60°C or higher. |
|
2210 Series |
|
For general bonding, sealing, and casting. Cures at 80°C or higher. |
|
2220 Series |
|
For general bonding, sealing, and casting. Cures at 100°C or higher. |
|
2230 Series |
|
For general bonding, sealing, and casting. Cures at 120°C or higher. |
|
2240 Series |
|
For structures that need high adhesive strength. |
|
2250 Series |
|
For potting. Good flexibility. |
|
2270 Series |
|
For special purposes. |
|
2280 Series |
|
For special purposes. |
|
2284 Series |
|
For adjustment of motor balance. |
3000 Series (UV-curing resins (acrylic-based))
The products in the ThreeBond 3000 Series are one-part, radical- and ultravioletcuring, nonsolvent adhesives that have been developed by the application of our research, our proprietary technologies, and our know-how. They are advanced industrial materials for use in sealing, bonding, and coating. They are recognized as cost-effective products for a variety of uses, such as the electrical and electronics industries, automobile manufacture, optics, and OA devices.
3300 Series (Electroconductive resins (adhesives, paint and paste))
The products in the ThreeBond 3300 series are conductive adhesives, each made up of a synthetic resin and a conductive filler containing metal such as silver, nickel, or carbon. They offer strong bonding to plastic, rubber, or ceramic, and can easily be used on assemblies that require soldering. They are widely used in producing printed circuits, bonding wire leads to electrodes, and bonding semiconductor elements and EMI parts. The series also includes anisotropically conductive adhesives that offer strong jointing of high-density multiterminal circuits such as LCDs, to meet requirements for smaller, denser, higher-precision electronic parts. The series includes liquids and tapes.
| Category |
Type |
Composition |
Properties |
Curing condition |
Properties |
Shelf life
at
5 to 10 °C |
Quantity |
| Binder |
Conductive
filler |
Viscocity
Pa s(P) |
Specific gravity
(25 °C) |
Time and
temperature |
Mixture
ratio |
Volume
resistivity
Ω m(Ω cm) |
Pencil
hardness |
One-part
thermal-
curing adhesive |
3301 |
Epoxybased |
Silver-based |
110(1100) |
2.90 |
30 min at
150°C or
60 min at
120°C |
- |
5 x 10-6
(5 x 10-4) |
7 to 9H |
3months |
500g |
| 3301F |
Epoxybased |
Silver-based |
24(240) |
3.04 |
30 min at
150°C or
40 min at
130°C |
- |
3 x 10-6
(3 x 10-4) |
4 to 7H |
3months |
200,
500g |
| 3302B |
Denatured
urethane-
based |
Silver-based |
18(180) |
2.73 |
30 min at
150°C or
60 min at
120°C |
- |
3 x 10-6
(3 x 10-4) |
3 to 6B |
3months |
200,
500g |
|
3372C |
|
| 3373C |
|
| 3380B |
|
ThreeBond 7741, 7781, 7782, 7784
Instant adhesive fixes the adherends each other in several seconds to tens of seconds. Until now, it has been used in a wide range of fields as household or industry use because of its characteristics and general versatility.
We have introduced many instant adhesives to the market, and we have developed the product specialized to "bond in a fraction of a second" when we get back to the basic of them. This time, TB7700 series (referred to as Gold Label series) is commercialized.
| 1) |
Improved initial bonding strength (set time) in several material |
| 2) |
More excellent long shelf life than ever |
| 3) |
Excellent adhesion to paper, hard-to-bond plastic, porous wood or so |
|
| 1) |
Suitable for application especially demanded for ultra-fast curing |
| 2) |
Suitable for paper material such as paper craft that it has been difficult to develop the initial bonding strength |
| 3) |
Suitable for porous and hard-to-bond materials when assembling or maintaining and repairing and wooden molds |
| 4) |
Suitable for bonding hard-to-bond plastic (e.g. PBT, POM, PPS) |
Properties and characteristics
|
| Test items |
TB7741 |
TB7781 |
TB7782 |
TB7784 |
| Type |
Standard type |
Ultra-fast curing type |
Ultra-fast curing type |
Ultra-fast curing type |
| Apperance |
Clear to Lemon yellow-clear |
Clear to Lemon yellow-clear |
Clear to Lemon yellow-clear |
Clear to Lemon yellow-clear |
| Viscosity |
2mPa s |
2mPa s |
15mPa s |
160mPa s |
| Specific gravity |
1.05 |
1.05 |
1.05 |
1.06 |
| Set time |
NBR |
2sec |
2sec |
2sec |
2sec |
| Iron |
3sec |
2sec |
2sec |
3sec |
| PC |
12sec |
7sec |
10sec |
10sec |
| PBT |
7sec |
5sec |
7sec |
7sec |
| Balsa |
3sec |
2sec |
2sec |
2sec |
| Japanese cypress |
60sec |
15sec |
10sec |
15sec |
| Acid paper |
20sec |
2sec |
3sec |
7sec |
|
| Polyacetal rising strength |
| Lap shear strength by material |
|
| Various adherend material |
Lap shear strength(MPa) |
| TB7741 |
TB7781 |
TB7782 |
TB7784 |
| Iron |
15.0 |
14.0 |
14.2 |
15.3 |
| Aluminum |
15.1 |
14.9 |
15.3 |
16.1 |
| SUS |
13.4 |
12.2 |
15.4 |
15.4 |
| Brass |
8.2 |
9.0 |
10.9 |
11.5 |
| Copper |
12.0 |
12.7 |
14.5 |
13.3 |
| Nickel |
10.6 |
13.3 |
14.8 |
15.7 |
| Zinc chromate |
7.8 |
7.5 |
7.8 |
8.0 |
| Hard vinyl chloride |
2.5 |
3.0 |
4.9(*) |
4.4(*) |
| PC (Polycarbonate) |
7.3(*) |
6.9(*) |
7.6(*) |
6.9(*) |
| Phenol |
9.6(*) |
10.5(*) |
11.1(*) |
10.8(*) |
| 6-nylon |
8.2(*) |
8.1(*) |
7.9(*) |
7.5(*) |
| 6,6-nylon |
12.9(*) |
13.1(*) |
12.1(*) |
12.0(*) |
| Noryl |
9.3(*) |
9.3(*) |
9.6(*) |
9.8(*) |
| ABS (Acrylonitrile-butadiene-styrene resin) |
5.9(*) |
6.2(*) |
6.2(*) |
6.3(*) |
| Glass epoxy |
18.2 |
19.2 |
20.0 |
18.8 |
| PBT (Polybutylene terephthalate) |
5.0 |
4.3 |
4.2 |
4.5 |
| PET (Polyethylene terephthalate) |
10.4(*) |
10.5(*) |
10.2(*) |
10.6(*) |
| PPO (Polyphenylene oxide) |
6.9 |
8.0 |
6.7 |
6.8 |
| PPS (Polyphenylene sulfide) |
1.4 |
1.9 |
2.5 |
2.5 |
| HIPS (Impact polystyrene) |
4.4(*) |
4.4(*) |
4.4(*) |
4.4(*) |
| Acryl |
7.9(*) |
7.6(*) |
7.8(*) |
8.7(*) |
| Polyacetal |
1.0 |
1.2 |
1.2 |
1.3 |
| NR (Natural rubber) |
0.4(*) |
0.4(*) |
0.4(*) |
0.4(*) |
| CR (Chloroprene rubber) |
0.6(*) |
0.6(*) |
0.6(*) |
0.6(*) |
| NBR (Nitrile rubber) |
0.8(*) |
0.8(*) |
0.8(*) |
0.8(*) |
| SBR (Styrene-butadiene rubber) |
1.7(*) |
1.7(*) |
1.7(*) |
1.7(*) |
| EPDM (Ethylene-propylene-diene terpolymer) |
0.8(*) |
0.8(*) |
0.8(*) |
0.8(*) |
| Balsa |
1.8(*) |
1.8(*) |
1.8(*) |
1.8(*) |
| Lauan (Veneer) |
- |
8.8(*) |
8.3(*) |
8.3(*) |
| Japanese cypress |
- |
11.2(*) |
12.5(*) |
10.5(*) |
|
|
| Note: |
Note: * in the table indicates the material failure of the adhrend itself. |
|
|
|
|
|
|
