Cytec manufactures CONAP® polyurethane and epoxy potting compounds and polyurethane and acrylic conformal coatings for electronic and electrical applications. Cytec’s global sales and technical service network supports a wide range of UL, IPC, and MILSPEC approved products, including recognition to UL 94 V-0, UL 94 5VA, and UL RTI 120°C. Products in this brochure meet the requirements of the RoHS directive. Cytec technical specialists are available to assist you with new designs, provide production support, and improve performance and line speed in existing applications.
POLYURETHANE FILLED SYSTEMS
These systems have varying degrees of work life, viscosity, and hardness for many potting and encapsulating applications such as modules, strain sensitive components, transformers, and coils. This series contains UL RTI 120°C and UL 94 V-0 recognized systems. All of these systems exhibit excellent performance when exposed to adverse environments and temperature ranges from -65°C to +130°C.
EPOXY FILLED SYSTEMS
These systems have varying degrees of work life, viscosity, flame retardant ratings, and thermal conductivity. Systems of note: FR-1047/ EA-87 is UL 94 5VA recognized.
The FR-1800 series is new UL 94 V-O epoxy technology: FR-1810 is 1:1 mix ratio and exhibits high elongation,
FR-1820 is fast gelling with low exotherm, and FR-1830 is low viscosity (2,200 cps) for optimum processing.
MILITARY AND HIGH RELIABILITY POLYURETHANE SYSTEMS
High reliability systems have excellent hydrolytic stability, outstanding electrical properties over a wide temperature
range, excellent thermal shock resistance, low temperature elasticity, low exotherm, and minimal shrinkage.
A unique characteristic of this series is acoustical similarity to sea water, which is an essential requirement for potting transducers and other sonic devices. EN-1554 and EN-1556 are qualified to MIL-M-24041-C.
EPOXY UNFILLED SYSTEMS
These systems possess low shrinkage, low exotherm, good thermal shock and electrical properties, with a
hardness range of 75-90 Shore D. These low viscosity systems are used for potting and encapsulating
resistors, connectors, solenoids, transformers, and other electrical devices.
POLYURETHANE UNFILLED SYSTEMS
Low viscosity, low durometer polyurethane systems for potting, casting, embedding, and encapsulation of electronic circuits, components, and power devices. Low stress build-up on embedded components, excellent moisture resistance, and low shrinkage.
Polyurethane (Type UR) and Acrylic (Type AR) coatings for aerospace, automotive, consumer, industrial and marine applications. Solvent, water based, and 100% solids systems available. Cytec products are qualified to
MIL-I-46058-C and IPC-CC 830 standards and recognized to UL 94 V-O.
Conathane Polyurethane Filled Systems:
EN-2521, EN-2523, EN-2534, EN-2550, EN-2551, EN-2552, EN-2553, EN-3010, EN-4020.
Conathane Military And High Reliability Polyurethane Systems:
EN-7, EN-1554, EN-1556, EN-16
Conathane Polyurethane Unfilled Systems:
EN-14, EN-21, DPEN-22400
Conapoxy Epoxy Filled Systems:
CONAPOXY FR-1047 WITH EA-02, EA-028, EA-87
CONAPOXY FR-1210 WITH EA-02, EA-028, EA-87
CONAPOXY FR-1810 BLACK
CONAPOXY FR-1820 BLACK
CONAPOXY FR-1830 BLACK
Conpoxy Epoxy Unfilled Systems:
CONAPOXY RN-1000 WITH EA-02, EA-028, EA-87
CONAPOXY RN-1200 WITH EA-02, EA-028, EA-87
Conap Conformal Coatings: