Connecter/Terminal/Housing
Adhesive/Sealant/RTV/Coatiing
Lubricant/grease/oil
Tape/insulation/thermal/Diffusion
Castrol
Home Connector/Terminal/Housing Cemedine Adhesive Series Kyodo yushi Sankei kagaku/Sankol ShinEtsu Silicone / Grease Products Contact Us

Products 

 

Two-component RTV rubbers (for moldmaking) KE-1222A/B

  • Two-component RTV rubbers (for moldmaking) KE-1222A/B
  • Two-component RTV rubbers (for moldmaking) KE-1222A/B
  • Two-component RTV rubbers (for moldmaking) KE-1222A/B
Model No.︰KE-1222A/B
Brand Name︰ShinEtsu
Country of Origin︰Japan
Unit Price︰US $ 260 / pc
Minimum Order︰1 pc
Share on:

Product Description

Two-component RTV rubbers for moldmaking

Two-component RTV silicone rubber compounds for moldmaking are suitable for mold masters for molding with polyester resin, epoxy resin, urethane foam, wax, plaster, and low-melt-point metal alloys. These RTV silicone rubber compounds allow accurate reproduction of the shape of the original. They are easy to use and are thus used widely in industrial applications, as well as by hobbyists looking to create the perfect replica.

Product Detail

Features
1、Workability
The base compound and curing agent are mixed and then poured into the mold to create a silicone rubber mold quickly. Workable time and cure time can be adjusted.
2、Mold-releasability
The cured rubber releases easily from the mold, so mold-release agents (soapy water, wax, etc.) are unnecessary.
3、Dimensional stability
These rubbers offer good dimensional stability, with little shrinkage.
4、Flowability
They have excellent flowability, so the original form is reproduced accurately. This includes even intricate shapes and details such as fingerprints and wood grain.
5、Non-exothermic
No heat is generated during curing, meaning no adverse effects to the original.

Typical Products

 

Application Grade Curing
method

Before curing

Appearance

Features
General purpose KE-12 Condensation White Good working properties
KE-14 Condensation Grayish white Good working properties
KE-17 Condensation Grayish white Good working properties
For welder molding KE-24 Condensation Grayish white High hatrdness
KE-26 Condensation Grayish white High hatrdness

High-strength

condensation-cure

type

KE-1414 Condensation Grayish white

Curing agent for skin-molding

available

KE-1415 Condensation Grayish white Hardness: 20
KE-1416 Condensation Grayish white Hardness: 15
KE-1417 Condensation Grayish white

Improves urethane

resistance. Hardness: 30

High-strength

addition-cure type

KE-1300T Addition Translucent  
KE-1310ST Addition Translucent

Improves urethane

resistance

KE1314-2 Addition Translucent Oil bleed
KE-1316 Addition Translucent Low viscosity, low hardness
KE-1600 Addition Grayish white High hardness
KE-1603-A/B Addition Transparent

High transparency, Mix ratio

1:1

KE-1606 Addition Transparent

High transparency, Mix ratio

10:1

Other KE-1222-A/B Addition A:Blue
B:Deep flesh tone
Fast cure, Putty type
KE-1241 Addition Grayish white

For printing on curved

surfaces

Silicone impression materials for high-precision moldmaking

 

 

Application Grade Curing
method

Before curing

Appearance

Features

For nanoimprint

lithography and

printing blankets

SIM-260 Addition Colorless,
transparent
Standard cure type.
Standard hardness.
SIM-240 Addition Colorless,
transparent
Standard cure type.
Low hardness.
SIM-360 Addition Colorless,
transparent
Rapid cure type.
 
Price Terms︰FOB HONGKONG,FOB SHENZHEN
Payment Terms︰TT
Product Image





Powered by DIYTrade.com
HomeContact UsSitemap