Home
Product Catalog
Cemedine
Tamura Solder Paste
YAZAKI Connectors
Konishi Adhesive
DIC Industrial Adhesive Tapes
Nichiban Tape
Tamura UV-curable Inks/Flux
Kyodo Yushi
Dupont krytox
DOWSIL
ShinEtsu
Cytec/Conap
HumiSeal Conformal Coating
Kluber
LUBE
THK
NSK
FUJI Adhesive
Sunrise MSI
Kanto kasei
SankeiKagaku(Sankol)
Tsukasa DC geared motor
Molykote
Other products
Cemedine Adhesive Series
Sankei kagaku/Sankol
ShinEtsu Silicone / Grease
SUMITOMO Connetors,Wires,Cables and Convoluted tubes
 YAZAKI Connetors,Wires,Cables and Convoluted tubes
FURUKAWA
Contact Us

Product Catalog 

 

Surise Photosensitive adhesives photobond 300

  • Surise Photosensitive adhesives photobond 300
  • Surise Photosensitive adhesives photobond 300
Model No.︰photobond 300
Brand Name︰Surise
Country of Origin︰Japan
Unit Price︰-
Minimum Order︰-
Share on:

 Total 3 Related Items 
Prev123

Product Description

Ultraviolet cure adhesives PHOTOBOND

PHOTOBOND is adhesive that cures with exposure to ultraviolet light. We were the first to put it to the practical use. 
PHOTOBOND is widely used to adhere glass and resins that pass ultraviolet light. 
We are the leading brand of Japan and popular among many customers.
The application of the PHOTOBOND is now extended from glass crafts to optical lenses and electronic components, and we are currently developing products for special uses, coating and temporary joint as well.

 

PHOTOBOND is adhesive that cures with exposure to ultraviolet light. We were the first to put it to the practical use. 
PHOTOBOND is widely used to adhere glass and resins that pass ultraviolet light. 
We are the leading brand of Japan and popular among many customers.
The application of the PHOTOBOND is now extended from glass crafts to optical lenses and electronic components, and we are currently developing products for special uses, coating and temporary joint as well.
Product Line-Up
■ PHOTOBOND 300 For art glass ■ PHOTOBOND 300K For optical applications / 
standard product
■ PHOTOBOND 029 For adhesion of different materials / 
Low viscosity
■ PHOTOBOND 150 For optical applications / 
low viscosity
■ PHOTOBOND 200 For coating and sealing purposes / 
aerobic
■ PHOTOBOND 470
■ PHOTOBOND 475
For optical applications / 
Light resistance and heat resistance
■ PHOTOBOND 840 Low Viscosity / 
warm water detachable
   
 

 

Used in such places
Usage Information
General instruction (*Please conduct adequate pretest according to your purpose.)
1. Remove dust, oil and dirt
First, clean the work surfaces removing dust, oil and dirt by using solvent, etc. 
If you use solvent, wait until the solvent thoroughly evaporated before you started adhering work.
2. Apply PHOTOBOND and adhere
Apply PHOTOBOND to the surface to be adhered, and press the other work surface firmly onto it. 
If bubbles appear this time, they would weaken the adhesive power. 
In that case, rub the work surfaces each other to eliminate the bubbles. 
The most suitable thickness depends on the adhering conditions. Conduct adequate pretest.
3. Fix work pieces and irradiate ultraviolet light
Use a fixing device to prevent the work pieces from moving.
From the direction more ultraviolet passable, irradiate ultraviolet light vertically and evenly against the work surface. The irradiation time differs depending on adhering conditions. Please conduct adequate pretest. 
When the adhering surface is large, move the irradiation position gradually, and ensure the entire surface gets the irradiation evenly.
4. Wipe away the runoff PHOTOBOND
The runoff PHOTOBOND does not cure when exposed to ultraviolet as far as there is oxygen. 
After the irradiation, wipe it away by suitable solvent (alcohols solvent, petroleum benzine, carbon-hydride cleaner).
For the purposes such as coating that cannot block the air, refer to the following information:
1) Place entire work pieces in vacuum.
2) Conduct irradiation in work condition filled with inactive gas such as N2 (nitrogen), CO2 (dry ice). 
3) Cover the surface by transparent polyethylene film, etc., and irradiate ultraviolet light through it. Remove the film after the irradiation.
 
Price Terms︰FOB SHENZHEN FOB HONGKONG
Payment Terms︰TT
Product Image



Related Products
Surise Photosensitive adhesives photobond 150
Surise Photosensitive adhesives photobond 150
Surise Photosensitive adhesives photobond 300K
Surise Photosensitive adhesives photobond 300K

Powered by DIYTrade.com
HomeContact UsSitemap