Elastic adhesive | Highly heat-resistant Elastic Adhesive SX7700 320ML/Cartridge
Features
- This highly heat-resistant adhesive can be used at temperatures of up to 150°C, maintaining stable adhesive properties even in harsh temperature environments.
- Contains no low-molecular siloxanes, which can cause electrical contact failure.
- Adheres well to various materials, including engineering plastics such as PBT.
- Environmentally friendly, solvent-free adhesive that is safe to work with.
Product Data
Adhesive properties for various types of adherends
(MPa)
| Adherends |
Tensile shear strength |
| PVC |
1.5 |
CF |
| PC |
1.4 |
CF |
| PS |
0.7 |
AF |
| ABS |
1.4 |
CF |
| PMMA |
0.8 |
AF |
| PA6 |
1.6 |
CF |
| SPCC |
1.9 |
CF |
| AL |
2.4 |
CF |
* CF:Cohesion Failure, AF:Adhesive Failure
The numbers indicate their proportion to the adhesion area.
Surface treatment : None
Coating quantity : Coated on both sides 100μm thick (per side)
Curing condition : After the open time 2 min pasting together
Curing : 23°C50%RH x 7 days
Pressing : 2 pinches
Tension speed : 50mm/min
Heat aging resistance (AL x AL)
(MPa)
| Temperature / Time |
Tensile shear strength |
| Initial value |
2.4 |
CF |
| 150°C |
500hr |
5.8 |
CF |
| 1000hr |
7.3 |
CF |
| 2000hr |
8.3 |
CF |
| 3000hr |
8.8 |
CF |
| 160°C |
500hr |
8.2 |
CF |
| 1000hr |
8.3 |
CF |
| 2000hr |
8.6 |
CF |
* CF:Cohesion Failure, AF:Adhesive Failure
The numbers indicate their proportion to the adhesion area.
Surface treatment : None
Coating quantity : Coated on both sides 100μm thick (per side)
Curing condition : After the open time 2 min pasting together
Curing : 23°C50%RH x 7 days
Pressing : 2 pinches
Tension speed : 50mm/min
Property
| |
SX7700 |
| Appearance |
Black |
| Viscosity |
Pa･s/23°C |
22 |
| Density |
g/cm3 |
1.10 |
| Skin over time |
23°C |
10 min |
| Cured properties |
Hardness |
Shore A |
55.0 |
| Glass transfer point |
°C |
-48 |
| Breaking strength |
MPa |
0.6 |
| Elongation at break |
% |
90 |
| Linear expansion coefficient |
ppm/K |
281 |
| Capacity |
320ml |
