|
Fully-Automatic Dot Dispensing Device >> Loose gate three-axis automatic dispenserTS-550GS |
|
|
|
| Name：TenSun |
|
|
● Single machine operable, easy to install
TS-550GS make single machine operable come true without any exterior computer. It is easy to install and much easier to operate and set.
● Humanized Teach pendant make the program setting a piece of cake With graphical keys, the Teach pendant enables you to easily set all dispensing routes, even the matrix’s copy of all routes, deviation amendment, revising point as well as the transmitting of program among different machines.
● The only PC-BASE control system supporting 3D arc interpolation interpolation
The control card enable the TS-440GS to be a real device supporting PTP and CP three-axis arc interpolation, which can be used for any non-plane 3D dispensing route. |
|
| |
|
|
|
|
|
| |
Used at different and various requests of dispensing industry
Common dispensing glue such as UV glue, silicon, EPOXY, red and silver adhesive, AB glue, COB black glue, conductive adhesive, heat-radiating aluminum paste and super glue can all be used in TS-550GS devices.
Common application range is:
|
◇ Semiconductor packaging
◇ Fixing and protection of PCB electronic components
◇ Packaging adhesion of LCD glass panel
◇ Coating of panel of the mobile phone or dispensing of the key
|
◇ Dispensing seal of battery boxes
◇ Coating of parts of vehicles and machines.
◇ Coating adhesion of hardware parts
◇ Coating of rationed gas/liquid filling
|
|
|
Specifications :
|
（Modls）
|
TS-550GS
|
|
Effective process range X / Y / Z (mm)
|
500 / 500 / 50
|
|
Worktable / Tool
|
30 kg / 6 kg
|
|
Moving rate X&Y / Z (mm/sec)
|
500 / 250
|
|
(Repeatability)
|
+/- 0.01 mm/ Axis
|
|
(Resolution)
|
0.01 mm/Axis
|
|
(Data memory capacity)
|
4000 points
least 100 groups, each with 4000 points(the computer can infinitely extend groups)
|
|
Data memory method
|
CF Card
|
|
Display method
|
Teach Pendant LCD
|
|
(Motor System)
|
Three-axis servo system(Japanese Oriental motor)
|
|
(Interpolation)
|
PTP & CP
|
|
Driving Method
|
Three-axis screw arbor
|
|
Straight arc moving mode
|
3 axes
3 axes ( support any route in the 3D space)
|
|
Teaching mode
|
Teach pendant
|
|
I/0 signal
|
8 Inputs / 8 Outputs
|
|
External Control Interface
|
RS232
|
|
(Power input )
|
AC110V ~ 220V 300W
Full-voltage AC110V ~ 220V 300W
|
|
Relative temperature
|
10 – 40 °C
|
|
(Relative humidity)
|
20 – 90% no condensation
|
|
Machine dimension WxDxH (mm)
|
850 x 950 x 550
|
|
(Weight)
|
90 kg
|
|
|
|
|
|
